Decoupager Universal Image/Photo Transfer Medium Matte
Dries Clear Matte
Print design on plain paper using laser printer
Trim right to the edge of your design
Use a sponge brush to spread Decoupager Medium all over the front side of trimmed design
Place your design paper sticky side down onto the surface
Tap gently in the center and then smooth outwards toward the edges on all sides, removing air bubbles as you go. let dry for 24 hrs
Using a circular motion and the damp sponge, gently rub the paper off the canvas. Continue until all you see is your transferred image
Lastly if you wish to create a gloss finish apply an even coat of Decoupager Medium
Without the sealing coat, you will have a clear, matte finish
The sky is the limit to what you can make with almost any surface, wood, canvas, glass, clay, terra cotta, metal, etc.
Waterbased, Permanent
you MUST USE PHOTOCOPIES, not actual photographs
Use images made on laser printer or dry toner type copier
Get a mirror image reversed copy if picture has printed words
For full instructions, please visit www.Decoupager.com.au
Clean supplies while wet with soap and water